TE410P/TE405P Configuration
* Add all configuration to bottom of files.
* Make sure you have your jumpers set on your card if using E1
* Apply the E100P configuration to this one for use with E1
* Configuration for PRI

File: /etc/zaptel.conf
span=1,1,0,esf,b8zs
span=2,2,0,esf,b8zs
span=3,3,0,esf,b8zs
span=4,4,0,esf,b8zs
bchan=1-23
dchan=24
bchan=25-47
dchan=48
bchan=49-71
dchan=72
bchan=73-95
dchan=96

File: /etc/asterisk/zapata.conf
switchtype=national
signalling=pri_cpe
group=1
channel => 1-23,25-47,49-71,73-95

home - hosting plans - support - about us - terms - asterisk - contact

content © 2003 CancunSystems; design © 2003 lucid hysteria